so i was thinking about this over the weekend, but i dont think i have ever seen a rev video of a tib with a light weight flywheel. does anyone have an inside rev video of their car with a lightweight flywheel, i wanna see how quickly the revs drop

thats all, thanks :groupwave:

http://www.youtube.com/watch?v=1VWeuPQpQvI
I'm assuming it's a VHR from Valeo(11lb Fly)
Here's another one just cuz it's sick...
http://www.youtube.com/watch?v=rxofCoL-b1g

I was thinkng more along the lines of a members tib

Umm... Okay give me a couple weeks and mine will be the same setup as the top one...
Youtube is your friend...

i neeed a clutch and flywheel set up

Umm... Okay give me a couple weeks and mine will be the same setup as the top one...
Youtube is your friend...

ya ok, that top one is a race car

dude did you guys watch his rev limiter he was shifting @ like 10,000 rpms....wtf?

looked like it was stuck there man all the way to 3rd.

Back in the day, Valeo was a POS. dunno how they are now. Hell, our stock clutchs, are valeo. Pressure plate is.. so I assume the clutch disk, and flywheel are too.

Back in the day, Valeo was a POS. dunno how they are now. Hell, our stock clutchs, are valeo. Pressure plate is.. so I assume the clutch disk, and flywheel are too.

ya fuck valeo, i think everyone knows about the class action suite against hyundai for their stock valeo clutches lol

Back in the day, Valeo was a POS. dunno how they are now. Hell, our stock clutchs, are valeo. Pressure plate is.. so I assume the clutch disk, and flywheel are too.

There was a thread on NT explaining all of this...
Can't link it unfortunately... That is a heavy duty clutch kit(rated @ 350+) that has taken anything given to it in korea...
Speaking of which mine is in... Looks nasty... Check my ride section..

Get a fidanza flywheel bro ;) 9lbs. I would make a short video for you, but I don't have my camera at the moment.

Get a fidanza flywheel bro ;) 9lbs. I would make a short video for you, but I don't have my camera at the moment.

ya thats all i want to see, if a lil rev vid of someones car on here with a lightweight flywheel lol

that's cause the stock clutches suck, not so much with their upgraded stuff. It's like hyundai bought the cheapest thing they had and put em in

There was a thread on NT explaining all of this...
Can't like it unfortunately... That is a heavy duty clutch kit(rated @ 350+) that has taken anything given to it in korea...
Speaking of which mine is in... Looks nasty... Check my ride section..

Congrats, I hope your experience with them is good. I personally, wouldn't recommend Valeo to anyone..... not even my enemy/s.

that's cause the stock clutches suck, not so much with their upgraded stuff. It's like hyundai bought the cheapest thing they had and put em in

i heard they were rated for like 110hp so even on a stock v6 they were undersized..

ya thats all i want to see, if a lil rev vid of someones car on here with a lightweight flywheel lol

You gonna love it :p have you ever held a stock flywheel?? LMAO one heavy whore LOL

You gonna love it :p have you ever held a stock flywheel?? LMAO one heavy whore LOL

ya they are, kinda like the stock crank pulley...holy shit that was heavy

i heard they were rated for like 110hp so even on a stock v6 they were undersized..

yea exactly. Plenty of people are running the upgraded ones, the Hyper Racing, with zero problems. Also, kdmguy's hueg turbo tib was running the extreme. I've got the extreme as well with zero problems. Also, everyone has their problems. Fidanza fudged up the hy3 vs hy5 issue. CM fudged up their stg iv 6 puck sprung clutches.

ya they are, kinda like the stock crank pulley...holy shit that was heavy

Dude, can't wait to put ma 6.5 crank :p I'll see if I can get one of my boys camera within the next couple days. I'll make a short video of revving, and idle.. (solid mounts)

Yeah, I didn't go with CM because they were sending the wrong flywheels to people. The Extreme and VHR fit every year, 5 or 6 speed so no worries on fitment...

Yeah, I didn't go with CM because they were sending the wrong flywheels to people. The Extreme and VHR fit every year, 5 or 6 speed so no worries on fitment...

haha exaclty why i went with mine... and well cause Ted @ ark got me the extreme kit for $790 express shipped from korea + a $200 install. Good deal for all the gripping power i could want

What's so hard about finding the right one? HY3? HY5? you guys make it look complicated for our fellow newbies. Its more than likely, you'll need a HY5.

I got one of those bad apples.. CM's clutch disk. But, they sent me a new one the next day!

What's so hard about finding the right one? HY3? HY5? you guys make it look complicated for our fellow newbies. Its more than likely, you'll need a HY5.

I got one of those bad apples.. CM's clutch disk. But, they sent me a new one the next day!

yea, i mean, if i were going that route I wouldn't have gone with the hy5 even for my 09/02 produced tib. Simply because they're the common one and easy to sell. But still, it's a severly annoying issue on their part. Also, that cm thing is stupid too. You apparently got lucky cause they shaft a lot of people and give some excuse like, "well... you tried to install it so you're screwed."

Although, it's nothing a file can't fix as proven by Heratik.

What's so hard about finding the right one? HY3? HY5? you guys make it look complicated for our fellow newbies. Its more than likely, you'll need a HY5.

I got one of those bad apples.. CM's clutch disk. But, they sent me a new one the next day!

The problem was CM didn't know which flywheel they were sending out, I don't know if they had an internal SKU number mixup or fidanza mixed up a shipment.
Not only that, but the splines needed to be ground down to fit on some. I'm glad your car is all good to go, but I don't want to have my clutch torn apart and have to wait for another fly/clutch and have it sit. Sucks for the people that took it to shops, they were probably charged up the ass to store the car their while the replacement came...

You can try to file it yourself :) Just be careful. CM's wasn't doing this crap. Apparently, there's a few bad apples (clutch disk) out there.

http://www.youtube.com/watch?v=jyfgh8wCIQ0

I'm jealous now lol he's red lining at 7.5 or so LOL

Maybe this will help, I have 11lb chromoly flywheel. http://www.youtube.com/watch?v=IvrMwA7hhpw

Get a fidanza flywheel bro ;) 9lbs. I would make a short video for you, but I don't have my camera at the moment.

Yeah my 06 6speed revved to redline in about half the time with my South Bend/Fidanza flywheel setup. It was sweet.